Return to site
Return to site

How to use blank hydrographic films to print your own designs

Step 1: Print your picture or pattern by your ink jet printer with water basic pigment ink. Printed on glossy side.

Use " mirror printing" and " highest quality"


Step 2: Wait till the ink is totally dried and apply our activator A to protect the ink.


Step 3: Tape the borders of the film to limit the expansion of the film when placed on the water surface and pull off the stabilization paper of the backside.

Step 4: Place the film on the water ,the printed side face the air and fix it.

Step 5: Apply the second activator B to dissolve the film and wait about 45 seconds till the film is completely dissolved to ink.

Step 6: Dip the object into the film with an angle of 35-45 degrees to avoid air bubbles.

Step 7: Take out the object, flush away overhang parts of the film, wait till it is dry and apply a clear top lacquer as protection.

 

Subscribe
Previous
Happy New Year!!!
Next
New designs in March
 Return to site
Cancel
All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OK