Water Transfer Printing (also known as hydrograghics, immersion printing, and 3d cubic printing) is a surface decorating process where elaborate graphics like wood grain, carbon fiber, camouflage, geometrical designs, etc… are applied to a 3-D product surface.
The Water Transfer Printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim.
Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramics, and metal. For the most part, if the item can be dipped in water, the hydro-graphic process can be used.
The process utilizes a water-soluble film that contains the printed patterns. The film dissolves in the water and leaves the ink on the surface.
In the typical process, the item to be printed is first coated with a primer or an adhesion promoter.
12 Steps of complete dipping process
1. Clearing the surface of items
2. Surface treatment & base coat;
4. Spraying activator
5. Hydro Dipping
6. Flushing residue
9. Top coat
MOQ: 10 square meters of each design if in stock and 50 meters of each design if out of stock.
Packing: One design in a poly-bag,outside hard shipping carton.
Shipping Way: UPS/DHL/FEDEX/TNT/E-PACKET
Storage: 20-25 c° and 50% humidity in sealed package
WHAT CAN TSAUTOP DO FOR YOU
More than 20,000 designs for your choose,and popular films are in stock whenever you need it
The minimum order request 10 square meter each film.