TSAUTOP
TSAUTOP
60cm eco solvent printer no need activator A customized blank hydrographic film printer
Achieve high quality precision, wide-format ECO inkjet printer for blank hydrographics film
With the TSAUTOP latest blank hydrographic film printing solution , the new TSLX1624 produces high quality printing special for the printable hydro dipping film. The enhanced work efficiency combined with eco-solvent inks, offers both ecological and economical benefits. It is equipped with heating system which dry the media quickly after printing. So It can print the media continuously and roll it. The most exciting point is no need to spray activator A when use this printed hydrographics film. This blank hydrographics film printing solution make custom hydro dipping simple and easy to do.
Not all ECO printers can print perfect water transfer film.
Email：sales2@tsautop.com for more details
ECO INK PRINTER PRINTING GUIDE
IMAGE PREPARATION
1. Print on the coated side of the film. Coated side has a matte appearance.
2. When you print the blank hydrographics film, please set the pre and post platform temperature at 50℃ that ensure the film dry quickly.
3.Since using ECO solvent ink on the coated side, so please set the print speed at 8pass or 12pass which ensure the pattern sharp and clear,and dry quickly.So it can print hydrographics film 2-4sqm/hour .But the printed film can be stored long time without spraying activator A.
4.This printed film don't need spray a light coat of lacquer, or fixative, to printed side of film . You can use it directly after printing in 15days.
DIPPING INSTRUCTIONS
1. Cut printed film to size needed and then remove the clear backer.
2. The film is then placed on the water, printed side up.
3. Recommended water temperature is 90° F (25-32° C).
4. Film should dwell on the water for 60-75 seconds.
5. Spray with activator. this activator is special formula for this printed film, so you can buy it with the film from my company or you use the weaker activator than normal.
6. After hydro dipping object, the PVA film is removed by rinsing with water. Warm water speeds up PVA removal, but temperature should not exceed 120° F
to be sure the image is not removed during rinsing.
7. After object is rinsed, the surface should no longer feel slimy, so you need to wash it with pure water again until the surface isn't slimy.
Please rinse the object with a highpresure rinsing station for a longer period of time.
8. After PVA removal, allow object to dry completely.
9. Apply your favorite clear coat for surface protection.
STORAGE
• Blank PVA film should be stored between 68°-75° F.
• It is suggested for relative humidity levels to be between 45-60%.