Step 1: Print your picture or pattern in your inkjet printer.
Use " mirror printing" and " highest quality
Step 2: Wait till the ink is totally dried and apply our activator A to protect the ink.
Step 3: Tape the borders of the film to limit the expansion of the film when placed on the water surface and pull off the stabilization paper of the backside.
Step 4: Place the film on the water and fix it.
Step 5: Apply the second activator B to dissolve the film and wait about 45 seconds till the film is completely dissolved.
Step 6: Dip the object into the film with an angle of 35-45 degrees to avoid air bubbles.
Step 7: Take out the object, flush away overhang parts of the film, wait till it is dry and apply a clear top lacquer as protection.